There's a way to avoid certain entries appearing in the error report indefinitely. You can use this for example for tape cleaning messages:
The following command shows you the entries that are written to the error log, but not reported on:
# errpt -t -F Report=0Let's say you don't want any reports on errors with ID D1A1AE6F:
# errupdate [Enter]With "Report=False", errors are still logged in your logfile (usually /var/adm/ras/errlog). If you don't want them to be logged to the error log, for example when you have an errnotify (which still starts an action, also for error ID's with "Report=False"), you can change "Report=False" to "Log=False".
=D1A1AE6F: [Enter]
Report=False [Enter]
[Ctrl-D]
[Ctrl-D]
More info on this subject can be found here.
If you found this useful, here's more on the same topic(s) in our blog:
- How to create a null printer
- Number of active virtual processors
- Identifying devices with usysident
- How to unconfigure items after mksysb recovery using NIM
- Copy printer configuration from one AIX system to another
UNIX Health Check delivers software to scan Linux and AIX systems for potential issues. Run our software on your system, and receive a report in just a few minutes. UNIX Health Check is an automated check list. It will report on perfomance, capacity, stability and security issues. It will alert on configurations that can be improved per best practices, or items that should be improved per audit guidelines. A report will be generated in the format you wish, and the report includes the issues discovered and information on how to solve the issues as well.
Interested in learning more?
Interested in learning more?
